what does failed to connect 10061 actually mean?
some times ive seen failed to connect 10060 also.. ive no idea what they mean other than i cant connect XD
any idea's?
This is a discussion on what does failed to connect 10061 actually mean? within the Tech Support forums, part of the Knight Online (ko4life.com) category; what does failed to connect 10061 actually mean?
some times ive seen failed to connect 10060 also.. ive no idea ...
Page: 1
what does failed to connect 10061 actually mean?
some times ive seen failed to connect 10060 also.. ive no idea what they mean other than i cant connect XD
any idea's?
10061
Question/Problem: WSAECONNREFUSED (10061) Connection refused
Answer/Solution: Connection refused. No connection could be made because the target machine actively refused it. This usually results from trying to connect to a service that is inactive on the foreign host.
User suggestions: Either you went to the wrong host, or the server application you're trying to contact isn't executing. Check the destination address you are using. If you used a hostname, did it resolve to the correct address? If the hostname resolution uses a local hosttable, it's possible you resolved to an old obsolete address. It's also possible that the local services file has an incorrect port number (although it's unlikely).
10060
Question/Problem: Connection timed out.
Answer/Solution: A connect or send request failed because the connected party did not properly respond after a period of time. (The timeout period is dependent on the communication protocol.)
Check the obvious first: check that the destination address is a valid IP address. If you used a hostname, did it resolve to the correct address? If the hostname resolution uses a local host table, it is possible you resolved to an obsolete address. Can you ping that hostname?
Do you have a router configured? Is the router up and running? (You can check by pinging it, and then ping an address on the other side of it.) Try a traceroute to the destination address to check that all the routers are functioning.
Check your subnet mask. If you don't have the proper subnet mask, your network system may treat a local address as a remote address (so it forwards addresses on the local subnet to the router, rather than broadcasting an ARP request locally), or vice versa.
GOOGLE FFS
Bookmarks